Combat Robot Starter Kit 3D Printed Flipper (Fairyweight)
This kit is made to compete in Fairyweight (150g) competitions.
9V Battery is for testing or can be mounted on the lid with a zip tie. For battery that fit inside you can use a small 2S (250mAh) lipo. We will include a lipo plug if purchased at the same time.
Instruction Video. Please note the remote is different than the remote in the video.
Video in action at Michigan Mashup
Parts list: Color may vary
- Link to open source 3D print STL. files Design and instruction credit goes to JairEmia so please give like if you enjoy his design
- 2X 500RPM N20 (Drive Motors) Soldering Required.
- 2X 100RPM N20 for (Flipper Arm) Soldering Required.
- 1X Toggle Power Switch (Upgrade to a professional power switch as shown in video here)
- 1X 9VBattery Plug
- 2X Wheels
- 5X small zip ties to hold motors and 9V battery on lid
- 12X 2M screws for plastic for attaching the top & wedge
Complete Kit:
- All 3D printed parts
- Remote with 6 buttons
- Receiver/ESC with built in 6 channel brush motor ESC
- If you have your own remote. Motors are compatible with this ESC
Build Notes:
Soldering Required. Print settings should be 3 walls and 20% infill since this will make most of the bot solid and keep you within weight using PLA.
Suggest prior knowledge in soldering and RC electronics as these kits are mid level.
$40.00Price
){kind=link}