If you are a fan of the TV show Battlebots this is a great way to get the feeling of the combat robot sport without permanent damage. Challenge your opponent and win by knocking off all 4 magnet wheel guards and wheels. These toys are safe to use without needing a safety enclosure while still mimicking the thrill of destruction of battling combat robots. Fight multiple robots at the same time for an all-out brawl. Purchase and get all the 3D print files to make replacement parts like weapon upgrades, hockey sticks, new lid pre designed, and all other parts on your bot.
 
We also have rental options for parties and events. Two robots ship directly to your door.
 
Instruction video to assemble
PDF Instructions V1.3
Please note changes to instruction on video description
 
Easy to repair & replace parts
Safe for kids
No safety enclosure needed
3D print files to make your own replacement or customized parts
Replacement parts available. Most parts are between $3 to $5
Upgradable to 2S lipo battery for more weaponpower, drive power and longer run time (up to an hour or more on 450mAh). Lipo charger & male JST X2 plug required  (Plug incuded if you buy charger from us at the same time) 
 
Complete Kit
Magneto Battle Robot
Whats Incuded:
Chassis, Weapon, Guards, Wheels, Motor Mounts, Pully, Remote Adaptor & Clear Lexan Lid
Files to 3D print all parts for both models of Magneto Bot & Any Upgrades
All electronics
Remote Controller (Need 2 AA batteries for remote)
Weapon and drive motors
Small head philips screw driver
Screws, Hardware & Wire
Magnets
Zip ties to secure wires onto motors
Weapon belt & tire rubber
NiCad Recharable Battery Pack & Charger (Last for an hour of continuous run time)
 
What you will need to assemble Complet Kit:
AA batteries for remote X2
Soldering gun and solder (Unless you chose pre-solderd)
Pointy tool to remove 3D print support material. Incuded screwdriver will work also.
Pliers, wrench or socket to hold 1/4" hex nut while screwing together parts
Allen Wrench 3/32
Something to cut rubber
Something to cut and splice wire (Unless you chose pre-solderd)
Small file tool or sand paper to clean up 3D printed parts 
 
Print Your Own
Magneto Battle Robot Kit
Whats Incuded:
Files to 3D print all parts for both models of Magneto Bot & Any Upgrades
All electronics
Remote Controller (Need 2 AA batteries for remote)
Weapon and drive motors
Small head philips screw driver
Screws, Hardware & Wire
Magnets
Zip ties to secure wires onto motors
Weapon belt & tire rubber
NiCad Recharable Battery Pack & Charger (Last for an hour of continuous run time)
 
What you will need to Print Your Own:
3D Printer & Filliment (215g @ 20% infill)
Soldering gun and solder
Pointy tool to remove 3D print support material
Pliers, wrench or socket to hold 1/4" hex nut while screwing together parts
Allen Wrench 3/32
Something to cut rubber
Something to cut and splice wire
Small file tool or sand paper to clean up 3D printed parts